1) Scan the top of the two-dimensional code picture (the anemometer provides 2 systems)
2) Install mobile phone application prompts according to mobile phone
3) After installation, the anemometer should be turned on before use and then turn on the Bluetooth transmission function of mobile phone
4) When the green light is on, the match is successful. Click the start button on the mobile phone interface, and the anemometer and mobile phone can be transmitted in two directions
5) When the shutdown time is set to 0, it will not automatically turn off. When the automatic setting is closed, the anemometer will automatically sleep. At this time, it can be awakened by the button on the button anemometer
6) The power interface is located on the right side of the anemometer, and can be connected to the power adapter below 12V
