HoldPeak > AI - Page Sitemap > New anemometer facts for kids crane manufacturers for tower crane

New anemometer facts for kids crane manufacturers for tower crane

HoldPeak HP-866B-APP With Mobile APP Wind Speed Meter Measuring...

Inquire Online

Get the latest price

Quantity Needed：

Pieces

E-mail：

Company Advantages
1. The materials for HoldPeak anemometer facts for kids are carefully selected. The materials, controlled and inspected by QC team, must have high insulation level and anti-corrosive performance, especially the electric parts. It is easy to use - no expert knowledge required
2. It brings people more comfortable sleeping experience. It does not cause more allergic reactions and unpleasant smells to the people. The product is water resistant and meets the requirement of IP67
3. The product has excellent soundproofing performance. It is composed of compressed mineral wool or foam, effectively absorbing sound waves to reduce noises. The product provides reliability and safety even in extreme conditions
4. The water treating process will not release any toxic substances caused by the chemical reaction. Its filter system has chemical stability which allows it to withstand acid and alkali liquid.

HoldPeak HP-866B-APP With Mobile APP Wind Speed Meter Measuring Instruments Wind Chill With Backlight Digital Anemometer

New anemometer facts for kids crane manufacturers for tower crane-1

Wind Speed Range
Unit		Range		Resolution		Accuracy
M/s		0.5~30		0.1		±5%
Ft/min		99~5860		19
Knots		1~55		0.2
Km/h		2~90		0.3
Mph		1~65		0.2
Temperature range
Unit	Range		Resolution		Accuracy
℃	-10℃~45℃		0.2		±2℃
℉	14℉~113℉		0.36		±3.6℉
Battery			AAA 1.5V×2
Thermometer			NTC thermometer
Operating temperature			-10℃~45℃(14℉~113℉)
Relative humidity			≤90%RH
Store temperature			-40℃~60℃(-40℉~140℉)
Current consumption			About 3mA
Weight			153g(including battery)

Product Features

New anemometer facts for kids crane manufacturers for tower crane-2

Functionapplication

1) Wind speed & temperature
2) Wind chill indicstion
3) ℃/℉
4) Different wind speed measurement unit
5) Measure wind speed in: Current/Average/Max/Min
6) Low battery warning
7) LCD back-light
8)Manual/Auto Power Off

Operationapplication

1) Put battery into battery compartment, All the Symbol will blink for 1 second on the display
2) Recover battery cover, screw down press “①” in 1 second to turn on the unit. LCD will display wind speed, temperature and battery icon. Press again, it will power off.
3) Setting different wind speed unit： Press “②”each time, it will circulated among“m/s”, “Km/h”, “Ft/min”, “Knots”,and “mph” Digit symbol: M/s meter per second; km/h kilometer per hour; Ft/min feet per minute; knots nautical mile per hour; mph mile per hour;

New anemometer facts for kids crane manufacturers for tower crane-3

New anemometer facts for kids crane manufacturers for tower crane-4

4) Max/min: Press“③”it will display max or min
5) Back light：Press“④“，back light will turn on, press again, it will turn off , active for 15 second.
6) ℃/℉ switch option: Press“⑤”to select different temperature unit.
7) Average: Press "⑥" , average reading in 15 seconds will be displayed.
8) Measurement: when the wind vane (impeller) turns, LCD instant display wind speed and temperature. When temperature below 0 ℃, wind chill symbol will show on the LCD.

Install APP

1) Scan the top of the two-dimensional code picture (the anemometer provides 2 systems)
2) Install mobile phone application prompts according to mobile phone
3) After installation, the anemometer should be turned on before use and then turn on the Bluetooth transmission function of mobile phone
4) When the green light is on, the match is successful. Click the start button on the mobile phone interface, and the anemometer and mobile phone can be transmitted in two directions
5) When the shutdown time is set to 0, it will not automatically turn off. When the automatic setting is closed, the anemometer will automatically sleep. At this time, it can be awakened by the button on the button anemometer
6) The power interface is located on the right side of the anemometer, and can be connected to the power adapter below 12V

Company Features
1. Our factory is located in a strategical place. It has proximity and connectivity with airport, seaports, and a network of roads with adequate logistics framework.
2. Since founded, HoldPeak brand has been paying a lot of attention to increasing customer satisfication. Ask online!

y******x

HoldPeak goes through a strict quality control process, including checking fabric defects and defects, ensuring correct color, and checking the strength of the final product. The product provides a high-accuracy testing result

z******u

HoldPeak has passed comprehensive furniture testing. It has been tested for safety, durability, and structural adequacy and ensured that whether it is safe to use and fits for purpose. Its surface is not to get rusty

c******h

HoldPeak is finally produced after several production processes. They are rough machining, fine machining, and finishing process, which are done to improve surface smoothness and size accuracy. It is widely used by Apple, IKEA, and other famous companies

l******x

During the design stage of HoldPeak , many design factors have been taken into considerations. These factors mainly include space availability and functional layout. It has been granted with CE, RoHS, TUV and other certifications

q******r

Some of the materials in HoldPeak are purchased directly from suppliers that adhere to the highest environmental and quality standards, ensuring that these materials are the most sustainable and healthiest. Optional accessories are available to customers' needs

r******z

The surface of this product is smooth and has no shards. Its edges are uniform around all sides from multiple angles. Its key components are made of stainless steel which is durable in use

Name

E-mail

Company Name

Content

Chat Online

Chat Online inputting...

* Name

* E-mail

* Company Name

* Content